Help with calls for tender

Systemline PL fixed

Luminaire mounting structure for mounting linear luminaires in parallel to the railing at a mounting height of 2200 mm. The structure must be mountable by clamping to the railing structure without damaging the corrosion protection. Components or bolts are not allowed to extend into the passageway. Handrail clearance according to the relevant occupational health and safety regulations, corrosion protection, potential equalisation, and compliance with accident prevention regulations are to be ensured. All structural components must be entirely hot-dip galvanized or stainless steel 1.401. The structure must be of a screw-on type and have no welds in statically critical points. The luminaire and all components must have secured screw connections. All cable feed-throughs must be equipped with a securely attached protective sleeve and the necessary strain relief for cable protection. Delivery and installation of the luminaire mounting structure including all system parts.

Structure for mounting luminaires
For installing a luminaire on a cross-beam pole in parallel to the railing
with TÜV type approval No.44 780 13 412899

Manufacturer/type ADEXX Systemline PL 605 235 …
see ADEXX product list page 12 | Download

Systemline PL fixed

Luminaire mounting structure for mounting linear luminaires at 90° to the railing at a mounting height of 2500 mm. The structure must be mountable by clamping to the railing structure without damaging the corrosion protection. Components or bolts are not allowed to extend into the passageway. Handrail clearance according to the relevant occupational health and safety regulations, corrosion protection, potential equalisation, and compliance with accident prevention regulations are to be ensured. All structural components must be entirely hot-dip galvanized or stainless steel 1.401. The structure must be of a screw-on type and have no welds in statically critical points. The luminaire and all components must have secured screw connections. All cable feed-throughs must be equipped with a securely attached protective sleeve and the necessary strain relief for cable protection. Delivery and installation of the luminaire mounting structure including all system parts.

Structure for mounting luminaires
For installing a luminaire on a cantilevered pole at 90° to the railing
with TÜV type approval No.44 780 13 412899

Manufacturer/type ADEXX Systemline PL 605 335 …
see ADEXX product list page 13 | Download

Systemline PL fixed

Luminaire mounting structure for mounting linear luminaires. All structural components must be entirely hot-dip galvanized or stainless steel 1.401. The structure must be of a screw-on type and have no welds in statically critical points. The luminaire and all components must have secured screw connections. All cable feed-throughs must be equipped with a securely attached protective sleeve and the necessary strain relief for cable protection. Delivery and installation of the luminaire mounting structure including all system parts.

Structure for mounting luminaires
For installing a luminaire at 90° on walls and structures, using a cantilever arm
with TÜV type approval No.44 780 13 412899

Manufacturer/type ADEXX Systemline PL 605 940 …
see ADEXX product list page 15 | Download

Systemline PL fixed

Luminaire mounting structure for mounting linear luminaires below the handrail in parallel to the railing. The structure must be mountable by clamping to the railing structure without damaging the corrosion protection. Components or bolts are not allowed to extend into the passageway. Handrail clearance according to the relevant occupational health and safety regulations, corrosion protection, potential equalisation, and compliance with accident prevention regulations are to be ensured. All structural components must be entirely hot-dip galvanized or stainless steel 1.401. The structure must be of a screw-on type and have no welds in statically critical points. The luminaire and all components must have secured screw connections. All cable feed-throughs must be equipped with a securely attached protective sleeve and the necessary strain relief for cable protection. Delivery and installation of the luminaire mounting structure including all system parts.

Structure for mounting luminaires
For installing a luminaire below the handrail in parallel to the railing
with TÜV type approval No.44 780 13 412899

Manufacturer/type ADEXX Systemline PL 605 059 …
see ADEXX product list page 14 | Download

Systemline PL fixed

Pole base for the installation of luminaires on plane surfaces using an insertable pole with Ø 1.1/2" and up to 3000 mm mounting height. All structural components must be entirely hot-dip galvanized or stainless steel 1.401. The structure must be of a screw-on type and have no welds in statically critical points. The luminaire and all components must have secured screw connections. All cable feed-throughs must be equipped with a securely attached protective sleeve and the necessary strain relief for cable protection. Delivery and installation of the luminaire mounting structure including all system parts.

Structure for mounting luminaires
Pole base for free mounting of poles.
with TÜV type approval No.44 780 13 412899

Manufacturer/type ADEXX Systemline PL 200 …
see ADEXX product list page 15 | Download

Systemline F hinged

Luminaire mounting structure, foldable over the platform railing, for mounting linear luminaires in parallel to the railing at a mounting height of 2200 mm. The structure must be mountable by clamping to the railing structure without damaging the corrosion protection. Components or bolts are not allowed to extend into the passageway. Handrail clearance according to the relevant occupational health and safety regulations, corrosion protection, potential equalisation, and compliance with accident prevention regulations are to be ensured. All structural components must be entirely hot-dip galvanized or stainless steel 1.401. The structure must be of a screw-on type and have no welds in statically critical points. The luminaire and all components must have secured screw connections. All cable feed-throughs must be equipped with a securely attached protective sleeve and the necessary strain relief for cable protection. The structure shall be such that one person can handle it safely for mounting and for service purposes, with a safeguard against unintended tilting of the pole. Delivery and installation of the luminaire mounting structure including all system parts.

Structure for mounting luminaires
For installing a luminaire on a cross-beam pole in parallel to the railing
with TÜV type approval No.44 780 13 412899

Manufacturer/type ADEXX Systemline F 610 235 …
see ADEXX product list page 16 | Download

Systemline F hinged

Luminaire mounting structure, foldable over the platform railing, for mounting linear luminaires at 90° to the railing at a mounting height of 2500 mm. The structure must be mountable by clamping to the railing structure without damaging the corrosion protection. Components or bolts are not allowed to extend into the passageway. Handrail clearance according to the relevant occupational health and safety regulations, corrosion protection, potential equalisation, and compliance with accident prevention regulations are to be ensured. All structural components must be entirely hot-dip galvanized or stainless steel 1.401. The structure must be of a screw-on type and have no welds in statically critical points. The luminaire and all components must have secured screw connections. All cable feed-throughs must be equipped with a securely attached protective sleeve and the necessary strain relief for cable protection. The structure shall be such that one person can handle it safely for mounting and for service purposes, with a safeguard against unintended tilting of the pole. Delivery and installation of the luminaire mounting structure including all system parts.

Structure for mounting luminaires
For installing a luminaire on a cantilevered pole at 90° to the railing
with TÜV type approval No.44 780 13 412899

Manufacturer/type ADEXX Systemline F 610 335 …
see ADEXX product list page 17 | Download

Systemline e-PL absenkbar

Vertically sliding luminaire mounting structure for mounting linear luminaires at 90° to the railing at a mounting height of 2500 mm. Lamp must be lowerable to a working height of about 1600 mm above platform level. The structure must be mountable by clamping to the railing structure without damaging the corrosion protection. Components or bolts are not allowed to extend into the passageway. Handrail clearance according to the relevant occupational health and safety regulations, corrosion protection, potential equalisation, and compliance with accident prevention regulations are to be ensured. All structural components must be entirely hot-dip galvanized or stainless steel 1.401. The structure must be of a screw-on type and have no welds in statically critical points. The luminaire and all components must have secured screw connections. All cable feed-throughs must be equipped with a securely attached protective sleeve and the necessary strain relief for cable protection. The structure shall be such that one person can handle it safely for mounting and for service purposes. Delivery and installation of the luminaire mounting structure including all system parts.

Structure for mounting luminaires
For installing a luminaire on a cantilevered pole at 90° to the railing
with TÜV type approval No.44 780 13 412899

Manufacturer/type ADEXX Systemline ePL 605 310 …
see ADEXX product list page 19 | Download

Systemline e-PL absenkbar

Vertically sliding luminaire mounting structure for mounting linear luminaires in parallel to the railing at a mounting height of 2200 mm. Lamp must be lowerable to a working height of about 1600 mm above platform level. The structure must be mountable by clamping to the railing structure without damaging the corrosion protection. Components or bolts are not allowed to extend into the passageway. Handrail clearance according to the relevant occupational health and safety regulations, corrosion protection, potential equalisation, and compliance with accident prevention regulations are to be ensured. All structural components must be entirely hot-dip galvanized or stainless steel 1.401. The structure must be of a screw-on type and have no welds in statically critical points. The luminaire and all components must have secured screw connections. All cable feed-throughs must be equipped with a securely attached protective sleeve and the necessary strain relief for cable protection. The structure shall be such that one person can handle it safely for mounting and for service purposes. Delivery and installation of the luminaire mounting structure including all system parts.

Structure for mounting luminaires
For installing a luminaire on a cross-beam pole in parallel to the railing
with TÜV type approval No.44 780 13 412899

Manufacturer/type ADEXX Systemline ePL 605 235 …
see ADEXX product list page 18 | Download

  • Home
  • Why Adexx
  • Systemline E-PL
  • Systemline F
  • Systemline PL
  • Occupational safety
  • Instructions
  • Contact
ADEXX Befestigungstechnik GmbHSEAR GmbH